News & Events
Click Vinyl Floor Installation
Click vinyl floor is very easy to install,you also can follow the steps below to DIY.
Step1 - Clean the ground
Step2 Install the Corner
Step3 Install the Long side
Step4 Keep 5mm from the wall

Step 5 Cut the floor by kinfe

Step 6 Break the floor after cut by knife

Step 7 Keep the distance and right size

Step 8 Install the short side

Step9 First short side and then long side

Step10 Install the short side

Step11 And then install the long side

Step12 Install the long side

Step13 Cut the right size from the wall

Step14 Break the right size

Step15 Take off the small piece

Step16 Install the right size floor

Step17 First Short and then long side

Step18 All like so one by one

Step19 Cut again

Step20 Clean up the room
